AT&T Door Phone Controller - Manual (Page 10)

4 Installation-Dedicated Trunk Port 4-1
4-1. DIP Switch Setting for PBX with Dedicated Trunk 4-3
Port
4-2a. Connecting Door Phone Controller to Standard 4-4
Telephone Equipment
4-2b. Using Modified Modular Cable for Ground Start 4-5
Installations
5 Installation-Dedicated Station Port 5-1
5-1. DIP Switch Configuration for Telephone System 5-3
with Dedicated Station Access, Station Mode
5-2. Connecting the AT&T Door Phone Controller to a 5-4
Telephone System with Dedicated Analog Station
Port
6 Installation-No Dedicated Trunk/Station Port 6-1
6-1. DIP Switch Setting for PBX With Shared Trunk Port 6-3
6-2. Connecting The AT&T Door Phone Controller to 6-4
a Telephone System With Shared Trunk Port
D Using the Door Phone Controller With An Answering D-1
Machine
D-1. Installation Method Used For Answering Only D-2
Telephone Calls
D-2. Installation Method Used For Answering Both Door D-2
and Telephone Calls
E Appendix-Auxiliary Alert Device Connections E-1
E-1. Connections For Auxiliary Alert Device E-3
xi