Karcher KM 90-60 R P Advanced - Manual (Page 26)

- 11
Drive belt (4)
 Check circular belt side brush (5) for
tension, wear and damage.
Circular belt side brush (5)
 Check V-belt of the roller brush drive (6)
for tension, wear and damage.
 Tighten the V-belt at the screw if neces-
sary.
V-belt sweeping drive (6) and screw (7)
The drive control/electronic system is in-
stalled behind the front panel. To replace a
fuse, the front panel must be removed.

Loosen the front panel screws.
 Remove front panel.
 Replace defective fuses.
Note: The assignment of fuses is indi-
cated on the inside of the panel. Only
use fuses with identical safety ratings.
 Replace front panel.
Replacing fuses of drive control/ elec-
tronic system
F 1 Main fuse
Battery pole fuse 125 A
F 2 Printed board 7,5 A
F 3 Charge regulator 15 A
F 4 Printed board 25 A
F 5 Beacon light (optional) 7,5 A
26 EN