Alto-Shaam MN-28656 - Manual (Page 16)

TO COOK BY PROBE:
PRESS PROBE KEY
• Last set internal product temperature
is displayed.
➥
To change the internal product
temperature, press the Up ▲ or
Down ▼ Arrow key.
TO COOK BY TIME:
PR E S S T I M E K E Y
• Last set time is displayed.
➥
To change the cook time, press
the Up ▲ or Down ▼ Arrow Key.
C O N T R O L O P E R AT I O N
14.
TO PROGRAM A COOKING PROCEDURE
Select the product to be programmed and begin with the oven control power
OFF
.
PRESS AND RELEASE ON / OFF KEY
• The oven will beep for one second and power to the unit will be indicated by an illuminated
green indicator light located in the upper left corner of the
ON / OFF
key.
• The oven will begin operating in the hold mode.
• The amber hold indicator will be illuminated and the last set hold temperature will be displayed.
PRESS COOK KEY TO PREHEAT
• The green indicator light on the C
OOK
Key will illuminate.
• Last set cooking temperature will be displayed.
➥
To change the cook temperature, press the Up ▲ or Down ▼ Arrow key.
PRESS HOLD KEY
➥
To change the hold temperature, press the Up ▲ or Down ▼ Arrow key.
P R E S E T M E N U K E Y S
Alto-Shaam Cook and Hold ovens allow the operator to set up to eight cooking programs. Each cooking
program can be preset in any program mode to cook by time or internal product temperature. Cooking
programs are recalled and stored using the Preset Keys labeled "A through H." These keys, along with the key
labeled "I" share additional functions described in the "User Options" section of this guide.
P R O G R A M M I N G :