Alto-Shaam MN-28656 User Manual

Page 20

Advertising
background image

C O N T R O L O P E R AT I O N

18.

C H E F O P E R AT I N G T I P S

1.

For cooking specific products, refer to

individual cook and hold instructions.

2.

When cooking at 250°F (121°C), it takes

approximately one hour for the cooking

temperature to decrease to the selected

holding temperature. During this one hour

time period, the product will continue to cook.

3.

The cooking times in this guide are based on

meat taken directly from a refrigerated

temperature of 38° to 40°F (3.3° to 4.4°C), and

placed in a preheated oven. Adjustments must

be made for cooking products at other than

refrigerated temperatures.

4.

It is recommended the oven door remain

closed during the cooking cycle. Opening the

door will only increase the length of time

necessary to cook the product.

5.

Puncturing an item with any sharp instrument

may introduce bacteria inside the product.

Avoid using a fork to handle products, and

always use standard sanitary methods when

handling any food item.

6.

Use a metal-stemmed thermometer to check

the internal temperature of a product. Be

certain to sanitize the thermometer before

each use.

7.

Aged meat will cook faster, shrink more,

and cannot be held as long as fresh meat.

Because of the tenderizing capabilities of

the oven, aged meat or tenderizing agents

such as M.S.G. are not necessary, and are

not recommended.

8.

When cooking full loads, never cook below

the first shelf spacing from the bottom of the

oven compartment.

9.

Fully clean the oven

interior, drip pan,

shelves, and side racks

on a daily basis.

10.

Since there is no air movement inside the

Halo Heat

®

low temperature cooking and

holding oven, condensation will form on the

inside of the door during operation and may

leak out of the oven door vents. This is a

normal operating condition; however, any

condensation spilling on the floor should be

periodically wiped as a safety precaution.

There is an External Drip Tray included as

standard with most ovens.

11.

Drip pan overflow is a condition caused by

cooking some cuts of beef to an internal

temperature in excess of 130°F (54°C). The

External Drip Tray will help alleviate some of

this overflow problem. There is also an extra

large drip pan available as an option for the

1000-TH series ovens.

12.

Overflow may also be caused by overloading

the oven compartment. DO NOT OVERLOAD
THE OVEN

. Follow the recommended load

capacities listed in each individual procedure.

13.

For best results, many products

should be cooked on an overnight

cook-and-hold basis. Consult

individual procedures for

this recommendation.

The Alto-Shaam staff includes corporate

executive chefs who welcome questions.
You are invited to contact anyone on our
staff by phone (800.558.8744) or e-mail
through the Contact Us section of our
web site (www.alto-shaam.com) for help
with any cook and hold procedure.

NEED S

OME HE

LP

?

Advertising