Sony NWZ-X1051F - Manual (Page 131)

Common Settings
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
11 11
Enter Encryption Key screen
When the access point is set to use an encryption method, the Enter
Encryption Key screen appears.

Select the “WEP Key:” field or “WPA Key:” field to bring up the
onscreen keyboard, enter the encryption key, then select “Next.”
Enter the encryption key for using to connect to the access point. You can
enter a string of characters or a string of hexadecimal numbers as the
encryption key.

For how to input text, see “Text Input” ( page 20).
After setting, IP Address Settings screen appears ( page 131).
Note
 WEP of the player does not support 152-bit encryption key nor Shared Key
authentication.
IP Address Settings screen
After finishing the access point connection settings for “Scan Wireless LANs”
or “Manual Registration” on the New Registration screen, the IP Address
Settings screen appears. Select the setting method according to the access
point.
Item Description
Automatic Acquisition Sets the IP address automatically by using DHCP when the
access point supports DHCP.
Manual Settings Sets the IP address manually.
Enter the IP Address, Subnet Mask, Default Gateway, Primary
DNS, and Secondary DNS on the Manual Setting screen.

Select one of the items for IP address settings.
If you select “Automatic Acquisition,” the Confirmation screen appears
( page 132).
If you select “Manual Settings,” the Manual Setting screen appears.

Select each field to bring up the onscreen keyboard to enter the
settings, then select “Next.”
The Confirmation screen appears ( page 132).
 For how to input text, see “Text Input” ( page 20).
Continued 
Table of
Cont
ents
Inde
x