Acer Altos G900 - Manual (Page 200)

Appendix B: System management 184
7 From the Restricted Mode list, choose either:
8 From the Connection Mode list, choose either:
9 Click Save to save the changes.
10 Click Close to return to the PEM window.
Exiting the SSU
Exiting the SSU closes all SSU windows.
• Disabled Remote systems are not allowed to initiate
connections.
• Enabled A remote system can initiate a connection, but
cannot perform control operations such as
power down, reset, or front panel NMI.
• Disabled The remote system has full control of the server.
• Direct Connect The COM2 port on the server is connected
by a serial cable to the remote system.
• Modem Connect The COM2 port on the server is connected
to a modem.
AA G900 ug - EN.book Page 184 Wednesday, September 25, 2002 5:23 PM