Acer Altos G900 - Manual (Page 81)

65
Processors
This section includes instructions for installing and removing processors
and heat sinks.
Processor sequence
You must install a processor in processor socket 1. When installing
multiple processors, populate the processor sockets in the order shown
in the figure below.
Important: If you are not using processor sockets 3 and 4, leave
the foam block in place. The block is required for proper airflow
for cooling the processors.
Figure 29 - Correct order in loading processors
AA G900 ug - EN.book Page 65 Wednesday, September 25, 2002 5:23 PM