Acer Altos G900 - Manual (Page 97)

81
3 Carefully pull on the carrier handle and slide the carrier out of the
bay.
4 Install a new drive into the carrier (refer to page 78).
5 Hold the carrier handle in the fully open position and slide the
carrier into the desired bay.
6 Push the carrier into the drive bay until the carrier handle latch
engages the locking slot in the edge of the drive bay.
Label Description
A Handle
B Latch
C Locking slot
Figure 42 - Removing a drive carrier
AA G900 ug - EN.book Page 81 Wednesday, September 25, 2002 5:23 PM