Acer Altos G900 - Manual (Page 90)

3 Hardware configuration 74
6 If you are not reinstalling a board in the same slot, install an
expansion slot cover and reinstall the rear access panel (refer to
page 45).
If you are installing a new board, follow the instructions on
page 71.
Installing and removing a PCI add-in board in
a non-hot-plug slot
Caution! The PCI add-in board slots located under the system
board access panel are not hot-plug slots.
Figure 38 - Installing and removing a non-hot-plug PCI add-in board
AA G900 ug - EN.book Page 74 Wednesday, September 25, 2002 5:23 PM