Acer Altos G900 User Manual
Page 77
61
6
Connect all internal cables to the mainboard.
To make sure you route the cables correctly, refer to “Front panel
board” on page 91. If the cables are not routed correctly, you
won't be able to close the front subchassis.
7
Install the PCI add-in board curtains as follows:
a
At the back of the electronics bay, slide the end of a curtain
with the locking tab into the topmost square hole adjacent to
any add-in board expansion slot.
b
At the front of the electronics bay, slide the tab at the other
end of the curtain into the clip on the corresponding
retention mechanism.
8
Install all PCI add-in boards and attach any internal cables to the
boards.
9
Attach the external cables to the mainboard I/O ports.
AA G900 ug - EN.book Page 61 Wednesday, September 25, 2002 5:23 PM