Sony MEX-DV2000 - Manual (Page 35)

35
*1 Appears only when a center speaker is connected
and set to “C ON” (page 38).
*2 Appears only when a subwoofer is connected and
set to “SW ON” (page 38).
*3 Appears only when a center speaker is not
connected and set to “C OFF ” (page 38).
Enjoying sophisticated sound
functions — X-DSP
X-DSP, Sony’s new sound engine, creates an
ideal in-car sound field with digital signal
processing. X-DSP contains the following
features: CSO (Center Speaker Organizer),
Intelligent Time Alignment, and EQ7.
Creating a virtual center speaker
— CSO
To fully enjoy surround sound, it is adequate to
have 5 speakers (front left/right, rear left/right,
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center
speaker even if it is not connected.
To activate CSO, press (SOUND) repeatedly
until “CSO” appears, then set to “ON.”
For details on this procedure, see “Adjusting the
sound characteristics — SOUND” on page 34.
Note
CSO is deactivated while the karaoke mode (page 30)
or EQ7 (page 34) is activated, or “SUPER AUDIO CD
MODE”/“SA-CD MOD” is set to “HQ” (page 42, 46).
Optimizing sound for the listening
position — Intelligent Time
Alignment
The unit can change the localization of sound by
delaying the sound output from each speaker to
suit your position, and simulate a natural sound
field with the feeling of being in the center of it
wherever you sit in the car.
The setting is configurable both from the sound
menu (page 34) and the visual setup menu
(page 39).
The options for “POS” (sound menu) and
“POSITION SELECT” (visual setup menu) are
indicated below.
By the sound menu
Press (SOUND) repeatedly until “POS” appears,
then select your listening position.
For details on this procedure, see “Adjusting the
sound characteristics — SOUND” on page 34.
POS (Position): Selects the listening position
(page 35).
Z X Z
</M/m/,
ENTER
SYSTEM
SETUP
SOUND
VISUAL
SETUP
O
FRONT L (1): Front left
FRONT R (2): Front right
FRONT (3): Center front
ALL (4): In the center of
your car
CUSTOM*: Precisely
calibrated position
* Appears only in visual setup.
For details on how to calibrate,
see “Precisely calibrating the
listening position — Intelligent
Time Alignment Tune” on
page 36.
continue to next page t
1 2
4
3