Sony MEX-DV2000 - Manual (Page 48)

48
Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
Note
The input level may be high if the sound distortion of
AUX input occurs. Check the input level by the
deflection of the spectrum analyzer. To show the
spectrum analyzer, set “M.DSPL” to “SA” (page 45). If
the spectrum analyzer indicates a peak value, lower
the input level.
1 Turn down the volume on the unit.
2 Press (SRC) repeatedly until “AUX” appears
on the main unit.
“AUX FRONT IN” appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press (SYSTEM SETUP).
6 Press M/m to select “AUX-LVL,” then press
(ENTER).
7 Press M/m to adjust the input level.
The input level is adjustable in single steps,
between –6 and +18.
8 Press (ENTER).
The setting is complete.
With the main unit
Press (SOURCE) instead of (SRC), rotate the volume
control dial instead of pressing
M/m.
CD changer
Selecting the changer
1 Press (SRC) repeatedly until “CDC” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
With the main unit
Press (SOURCE) instead of (SRC).
Skipping albums and discs
1 During playback, press M/m.
With the main unit
Use (3)/(4) (ALBUM –/+) instead of
M/m.
Repeat and shuffle play
1 During playback, press (1) (REP) or (2)
(SHUF) on the main unit repeatedly until the
desired setting appears.
* When one or more CD changers are connected.
To return to normal play mode, select “REP
OFF” or “SHUF OFF.”
Z X Z
M/m
ENTER
MODE SRC
To skip Press M/m
album and release (hold for a
moment).
album
continuously within 2 seconds of first
releasing.
discs repeatedly.
discs
continuously then, press again within 2
seconds and hold.
Select To play
REP DISC* disc repeatedly.
SHUF
CHANGER* tracks in the changer in random
order.
Disc number
Unit number
SHUF REP