Sony DSC-P41 - Manual (Page 32)

32
Indicators off
r
LCD screen off
r
Indicators on
• The image through the finder does not indicate
the actual recordable range. This is due to the
parallax effect. To confirm the recordable
range, use the LCD screen.
• Just as with the AE/AF lock indicator on the
LCD screen, when the AE/AF lock lamp of the
finder section stops flashing and remains on,
you can start shooting (page 24).
• When the LCD screen is turned off
– The zoom does not function (page 27)
– AF mode is set to [Single] (page 50)
– If you press (Flash mode)/ (Self-timer)/
(Spot meter) with the LCD screen turned
off, the image will be displayed on the screen
for approximately two seconds so you can
check or change the setting.
• When playing back still images, the status of
the LCD screen changes as follows: Image
information on
t Indicators off t LCD
screen off t Indicators on
• For details on the items displayed, see page
116.
• This setting is maintained even when the power
is turned off.
Inserting the date and time
on a still image
, Set the mode switch to , and
press MENU.
The menu screen appears.
• The date and time cannot be inserted in Multi
Burst mode.
• When images are shot with the date and time
inserted, the date and time cannot be removed
later.
• When shooting images with the date and time
inserted, the actual date and time are not
displayed on the LCD screen, and
is
displayed on the LCD screen instead. The
actual date and time are indicated in red on the
lower-right corner when the image is played
back.
1
Mode
Program
Camera
Auto
MENU