Connection/settings, Connecting to a wireless network, Checking the type of access points – Sony VGF-CP1U User Manual
Page 51: Setting with aoss
1
VGF-CP1 Series 3-300-630-31(1)
Connecting to a Wireless Network
By connecting this unit to a wireless network or the Internet, you can play back photos or music stored on a
computer or in a Web photo organizer on the Internet.
Hint
The reception icon is displayed when the information bar is at the top of the screen. The reception icon shows the
strength of the network signal, many bars around the antenna show a stronger signal.
To connect to a wireless network, the WLAN ON-OFF switch must be set to ON. The factory default setting is ON.
Note
In order to set up your home wireless network connection, you need a wireless LAN router and a subscription to an
Internet service provider.
Checking the Type of Access Points
If the access point device (wireless LAN router) supports AOSS, see “Setting with AOSS.” Otherwise, see
“Setting Manually” (page 54).
About AOSS
AOSS™ (AirStation One-Touch Secure System) is a technology developed by Buffalo Technology. The
wireless LAN can be connected with an one-touch operation, and security is set automatically.
Setting with AOSS
If you use an access point that supports AOSS, set by the following steps.
1
Press HOME on the remote control.
2
Press on the remote control, select [ Settings] by pressing , and press
(ENTER).
3
Select [ Network settings] by pressing on the remote control, and press
(ENTER).
The Network settings screen appears.
4
Select [Select a connection] by pressing on the remote control, and press
(ENTER).
Connection/Settings