Sony VGF-CP1U - Manual (Page 55)


VGF-CP1 Series 3-300-630-31(1)
3
Select [Search] by pressing  on the remote control, and press (ENTER).
A list of available access points is displayed.
4
Select an access point by pressing  on the remote control, and press  to
proceed to the next step.
The confirmation screen for SSID appears.

Hint
If several access points are displayed, select SSID of the access point in use.
5
Press  on the remote control to proceed to the next step.
The selection screen for the security type appears.
6
Select the security type by pressing  on the remote control, and press  to
proceed to the next step.
Select the security type confirmed in step 1.
If selecting other than [None], the screen to enter the WEP key or WPA key appears.

Hint
When selecting [None], proceed to step 12.
7
Press (ENTER) on the remote control to display the software keyboard,
enter the WEP key or WPA key, and press (ENTER).
Enter the password confirmed in step 1.