Sony VGF-CP1U - Manual (Page 53)

3
VGF-CP1 Series 3-300-630-31(1)
 Screen of this unit
“Communicating AOSS information with the access point...” appears.
Note
 An access point with a concealed setting may not be detected. In this case, select “Enter manually” in step 6, and
follow the on-screen instructions.
 The AOSS setting will be canceled automatically if the access point cannot be found within 2 minutes of initiating
reception. Cancellation of the process may take about 1 minute, depending on the network status. In this case,
wait a moment.
8
Confirm that “Configuring the access point completed” is displayed.
9
Press (ENTER) on the remote control.
The setting screen for Proxy appears.
10
If a Proxy setting is unnecessary, press  on the remote control to proceed to
the next step.
The connection name is displayed.

Hint
If Proxy setting is necessary, press (ENTER) on the remote control and select “Use” by pressing , and press
(ENTER). Then set the address and port number of the Proxy server.
For home use, Proxy setting is usually unnecessary. If Proxy setting is required, consult the administrator of the home
network or your Internet service provider.