Sony VGF-CP1U - Manual (Page 52)


VGF-CP1 Series 3-300-630-31(1)
5
Select [New connection] by pressing  on the remote control, and press
(ENTER).
6
Select [Use AOSS] by pressing  on the remote control, and press (ENTER).
Reception of AOSS setting starts.
7
Press and hold the AOSS button on the device until the access point indicator
blinks.
 Access point device
Press and hold the AOSS button until
the access point indicator blinks.

Hint
For details on the AOSS button or indicator, see the operating instructions supplied with the access point device
(wireless LAN router).