Sony VGF-CP1U - Manual (Page 62)

6
VGF-CP1 Series 3-300-630-31(1)
System settings
Item Options/Description (underlined option is the default setting)
Device name Registers a device name for this unit.
Auto power on/off This unit goes to standby mode automatically when the surrounding area
becomes dark. The power comes back on automatically when the surrounding
area becomes bright. The default setting is [Off ].
New info indicator Sets up the lighting pattern of the New Info indicator (always off in standby mode).
[Always on (with new arriv.)], [Auto on/off (with new arriv.)], [Always on], [Always off ].
System information Displays [MAC address], [IP address] and [Software version].
Internal memory info Displays the current usage of the internal memory.
Important messages Displays update information and some other important information. When
updating is completed, the power of this unit turns off automatically. After
confirming the power is turned off, disconnect the AC adapter, and leave for
more than 30 seconds, then connect the AC adapter again.
About VGF-CP1 Displays copyright and trademark information.
Initialization
Item Options/Description (underlined option is the default setting)
Initialize system Restores the system to the factory default.
Initialize settings Returns the settings to their factory defaults.
All registered frames are deleted, and sample frames are restored to their
defaults.
Initialize internal memory Resets internal memory to the factory default.
All registered photos and music files are deleted, and sample photos and music
files are restored to their defaults.
Initialize cache Resets the cache memory to the factory default by performing [Reload] for all
photos.
Data stored in the cache memory is deleted; however, photo files remain undeleted.