Sony VGF-CP1U - Manual (Page 56)

6
VGF-CP1 Series 3-300-630-31(1)
8
Press  on the remote control to proceed to the next step.
The selection screen for address settings appears.
9
Select [Easy] by pressing  on the remote control, and press  to proceed to
the next step.
The setting screen for the connection name appears.

Hint
Select [Custom] to manually set information, such as the IP address.
10
If it is unnecessary to change the connection name, press  on the remote
control to proceed to the next step.
The confirmation screen for settings appears.

Hint
Normally it is unnecessary to change the connection name.
11
Confirm the setting, and press  on the remote control to proceed to the next
step.
12
Select [Yes] by pressing   on the remote control, and press (ENTER).
Connection to the access point is confirmed. When connected properly, “Network connection
completed” is displayed.