Sony MEX-R5 User Manual

Page 49

Advertising
background image

49

01GB02CD-EUR.fm

masterpage:Right

MEX-R1/MEX-R5

2-581-681-12 (1)

The subtitle language cannot be changed or
turned off.

• Use the DVD menu instead of the direct

selection button on the card remote
commander (page 19).

• Multilingual subtitles are not recorded on the

DVD being played.

• The DVD prohibits the changing of the

subtitles.

The angles cannot be changed.

• Use the DVD menu instead of the direct

selection button on the card remote
commander (page 19).

• Multi-angles are not recorded on the DVD

being played.

• The DVD prohibits changing of the angles.

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the
power supply lead of a car’s aerial booster
(only when your car has built-in FM/MW/
LW aerial in the rear/side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 12).

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

t Set “LOCAL” to “OFF” (page 38).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set “MONO” to “ON” (page 38).

An FM programme broadcast in stereo is
heard in monaural.

The unit is in monaural reception mode.
t Set “MONO” to “OFF” (page 38).

RDS

The SEEK starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Deactivate TA (page 35).

No traffic announcements.

• Activate TA (page 35).
• The station does not broadcast any traffic

announcements despite being TP.
t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme

type.

Advertising