Start/stop mode setting, Indicators displayed in the recording mode, Recording a picture – Sony DCR-PC100 User Manual

Page 20

Advertising
background image

20

0:00:01

45min

40

min

REC

START/STOP

MODE

5SEC

ANTI GROUND SHOOTING

START/STOP MODE setting

:

Recording starts when you press START/STOP, and stops when you press it
again (default setting).

ANTI GROUND SHOOTING :

Your camcorder records only while you press START/STOP. Use this mode to
avoid recording unnecessary scenes.

5SEC: When you press START/STOP, your camcorder records for five seconds and

then stops automatically.

Notes
• You cannot use the fader function in the 5SEC or mode.
• The time code does not appear in the 5SEC mode.

To extend the recording time in the 5SEC mode
Five dots (zzzzz) appear, and then disappear at a rate of one per second. To extend
the recording time, press START/STOP again before all the dots disappear. Recording
continues for about five seconds from the moment you press START/STOP.

Indicators displayed in the recording mode

The indicators are not recorded on tapes.

Recording a picture

STBY/REC indicator

Remaining tape indicator
This appears after you insert a cassette and record or play
back for a while.

Remaining battery time indicator
This appears after you turn on the power and
wait for a while.

Time code/Tape counter

Cassette memory indicator
This appears when using a tape with cassette memory.

Recording mode indicator

Advertising