Sony DCR-PC100 - Manual (Page 80)

80
Notes on the LP mode
• When you record a tape in the LP mode on your camcorder, we recommend playing
back the tape on your camcorder. When you play back the tape on other camcorders
or VCRs, noise may occur in pictures or sound.
• When you record in the LP mode, we recommend using a Sony Excellence/Master
mini DV cassette so that you can get the most out of your camcorder.
• You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode
for the tape to be audio-dubbed.
• When you record in the SP and LP modes on one tape or you record some scenes in
the LP mode, the playback picture may be distorted or the time code may not be
written properly between scenes.
Notes on AUDIO MODE
• You cannot dub audio sound on a tape recorded in the 16-bit mode.
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance
in AUDIO MIX.
Icon/item
CM SEARCH
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
REC MODE
AUDIO MODE
Mode
z ON
OFF
z ON
OFF
z SP
LP
z 12BIT
16BIT
Meaning
To search using cassette memory (p. 49).
To search without using cassette memory.
To erase the title you have superimposed
(p. 71).
To display the title you have superimposed.
Not to display the title.
To label a cassette (p. 74).
To erase all the data in cassette memory.
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5 times the
SP mode.
To record in the 12-bit mode (two stereo
sounds).
To record in the 16-bit mode (the one stereo
sound with high quality).
POWER
switch
VTR
VTR
CAMERA
VTR
VTR
CAMERA
VTR
CAMERA
VTR
CAMERA
VTR
CAMERA
Changing the menu settings