Sony DCR-PC100 - Manual (Page 58)

58
Recording video or TV programs
Using the A/V connecting cable
You can record a tape from another VCR or a TV program from a TV that has video/
audio outputs. Use your camcorder as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VTR on your camcorder.
(3) Set DISPLAY in
to LCD in the menu settings (p. 76).
(4) Press MENU to erase the menu display.
(5) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(6) Press N on the VCR to start playback if you record a tape from a VCR. Select
a TV program if you record from a TV. The picture from a TV or VCR appears
on the LCD screen or in the viewfinder.
(7) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 5, press z REC and MARK simultaneously, then immediately press X. And in
step 7, press X at the scene where you want to start recording from.
AUDIO/VIDEO
S VIDEO
VIDEO
AUDIO
OUT
S VIDEO
5
REC PAUSE
: Signal flow