Sony DCR-PC100 - Manual (Page 50)

50
You can automatically search for the point where the recording date changes and start
playback from that point (Date search). Use a tape with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
You can use this function only when playing back a tape with cassette memory (p. 114).
(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in
to ON in the menu settings (p. 76). Default setting is
ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the date
search indicator appears.
The indicator changes as follows:
TITLE SEARCH
t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
(4) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
To stop searching
Press x.
Searching a recording by date
– Date search
POWER
LOCK VTR
MEMORY
CAMERA
OFF
3
4
1
SEARCH
MODE
DATE SEARCH
1 SEP / 5 / 99
2 SEP / 6 / 99
3 DEC / 24 / 99
4 JAN / 1 / 00
5 FEB / 11 / 00
6 APR / 29 / 00
DATE SEARCH
1 SEP / 5 / 99
2 SEP / 6 / 99
3 DEC / 24 / 99
4 JAN / 1 / 00
5 FEB / 11 / 00
6 APR / 29 / 00