Sony DCR-PC100 - Manual (Page 97)

97
“Memory Stick” Operations
Superimposing a still picture in a “Memory Stick” on a moving
picture – MEMORY MIX
Items to be adjusted
M. CHROM The color (blue) scheme of the area in the still picture which is to be
swapped with a moving picture
M. LUMI The color (bright) scheme of the area in the still picture which is to be
swapped with a moving picture
C. CHROM The color (blue) scheme of the area in the moving picture which is to be
swapped with a still picture
The fewer bars there are on the screen, the stronger the effect.
To change the still picture to be superimposed
Press MEMORY +/– or +/– on the Remote Commander after step 6.
To change the mode setting
Press SEL/PUSH EXEC dial after step 6, and repeat the procedure from step 4.
To cancel M. CHROM/M. LUMI/C. CHROM
Press MEMORY PLAY.
During recording
You cannot change the mode setting.
The “Memory Stick” supplied with your camcorder has stored 20 images
– For M. CHROM: 18 images (such as a frame) DSC00001 to DSC00018
– For C. CHROM: two images (such as a background) DSC00019 to DSC00020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 109).
If a still picture to be superimposed has lots of white areas
The thumbnail image may not be displayed clearly.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.