Sony DCR-PC100 - Manual (Page 82)

82
Icon/item
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
DV EDITING
Meaning
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel the melody and beep sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control.
To show the display on the LCD screen and
viewfinder screen.
To show the display on the TV screen, LCD
screen and viewfinder screen.
To light up the camera recording lamp at the
front of your camcorder.
To turn the camera recording lamp off so that
person is not aware of the recording.
To duplicate the desired portion on a tape by
simply selecting the scenes to edit, using other
equipment connected with an i.LINK cable (DV
connecting cable) (not supplied) (p. 56).
Changing the menu settings
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
MEMORY
VTR
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
In more than five minutes after removing the power source
The “AUDIO MIX,” “COMMANDER,” “HiFi SOUND,” “PROGRAM AE” and “WHT
BAL” items are returned to their default settings.
The other menu items are held in memory even when the power source is removed.
Mode
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF