Panasonic BL-MS103A - Manual (Page 118)

6 Setup Menu
118
recording. Turn off the record program.] will be displayed. To turn sensor use
off, first erase timer sensor recording settings (see page 84).
• To use a remote camera in Sensor Alert mode, for sensor recording, or for
continuous sensor recording, turn on sensor use.
6.5 Erasing a Camera
1. Select [Camera Setup] from the [Setup] screen (see page 95) and press
[ENTER].
2. Select the camera to be erased from the list and press [1].
• The confirmation screen appears.
3. Select [Yes] and press [ENTER].
• The camera is erased from the list.
• Once erased, the camera is unregistered.
If you attempt to erase a camera set for timer recording, one of the following errors
will appear.
When timer recording is set:
“This camera is used for timer recording. Turn off the record program.”
Erase the timer recording program (see page 84) and then try erasing the camera.
When continuous sensor recording is set:
“This camera is used for sensor recording. Turn off the record program.”
Erase the sensor recording program (see page 84) and then try erasing the
camera.
When both timer and continuous sensor recording is set:
“This camera is used for timer recording. This camera is used for sensor recording.
Turn off the record program.”
Erase the timer recording and sensor recording programs (see page 84), then try
erasing the camera.