Panasonic BL-MS103A - Manual (Page 28)

2 Connecting Cameras
28
• Cameras must be connected and configured by Quick Setup one at a time.
4. Once all of the cameras have been registered as in step 3, turn the BL-
WV10A off.
2.2.4 Confirming the Camera Image
1. Connect all cameras registered during Quick Setup and turn them all on.
fif
Note
• To use a wireless connection for the BL-C30A wireless camera,
disconnect it from the Ethernet cable, set the camera switch to
[WIRELESS] and turn the camera on again.
Ethernet cable
(included)
LAN jacks
Rear panel of camera
Rear panel
of BL-WV10A
BL-WV10A Video cable
Ethernet cable
TV
Switch
Bottom of BL-C30A