Panasonic BL-MS103A - Manual (Page 24)

2 Connecting Cameras
24
3. Switch the television input mode to video.
4. Confirm that the mode switch on the back of the BL-WV10A is set to [SETUP].
5. Insert the DC plug from the AC adaptor into the DC IN jack in the BL-WV10A.
6. Connect the AC cord to the AC adaptor and plug it in.
• The [Basic Setup] screen will appear on the television.
Note
• Once Quick Setup is completed, the [Basic Setup] screen will not appear
again. Settings can be confirmed and changed from the [Setup] screen
(see page 95). In order to display the [Basic Setup] screen again, you will
need to restore the BL-WV10A’s default settings (see page 131).
To power outlet
(AC 110 V)
Mode switch DC IN jack
AC adaptor
DC plug
AC cord