Panasonic BL-MS103A - Manual (Page 22)

2 Connecting Cameras
22
2.1 Local and Remote Cameras
Cameras accessed by the BL-WV10A are referred to as either “local” or “remote”
cameras, based on the way in which they are configured.
Local cameras allow you to not only monitor images, but can be used in
conjunction with the various features of the BL-WV10A. Remote cameras, such as
cameras accessed over the Internet, can be monitored, but certain BL-WV10A
features may not be available with remote cameras.
Note
• If the firmware version of a BL-C10A or BL-C30A is older than 1.22, [This
camera's firmware is out of date] will be displayed and the camera will be
registered as a remote camera.
• HCM series cameras with firmware older than version 1.08, as well as
zoom cameras, can be registered as remote cameras only.
• User names and passwords shown here are examples only.
INTERNET
BL-WV10A
Router
User Name: AAAAAA
Password:
BBBBBB
User Name: WWWWWW
Password:
XXXXXX
Admin. User Name: AAAAAA
Admin. Password:
BBBBBB
Remote Camera
Cameras connected via an Internet connection
Remote Camera
Camera's User Name and
Password is different from
the BL-WV10A's Admin. User
Name and Admin. Password Local Camera
Camera's User Name and
Password is the same as the
BL-WV10A's Admin. User
Name and Admin. Password
Local Area Network (LAN)
Local Camera
Cameras configured using the BL-WV10A's
Quick Setup utility (some exceptions apply)