Panasonic BL-MS103A - Manual (Page 50)

2 Connecting Cameras
50
2.4.6 Confirming the Camera Image
1. Turn on the router and the cameras connected to the router.
2. Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it
on.
3. Turn on the cameras connected to the BL-WV10A.
Note
• To use a wireless connection for the wireless camera BL-C30A,
disconnect it from the Ethernet cable, set the camera switch to
[WIRELESS] and turn the camera on again.
• After the launch screen, the Camera Monitoring Screen will appear.
Video
cable
Ethernet
cable
Ethernet
cable
Router
BL-WV10A
TV
Switch
Bottom of BL-C30A