Panasonic BL-MS103A - Manual (Page 26)

2 Connecting Cameras
26
2.2.3 Quick Setup
Once basic setup is complete, Quick Setup will automatically launch for network
and wireless settings. Setup will be complete in approximately 2 minutes.
• Once registration is complete, [Finished] will be displayed, the buzzer will
sound, and the wireless indicator will turn green.
fif
1. Connect a camera (using the Ethernet cable supplied with the camera) to any
of the LAN jacks on the BL-WV10A.
2. Turn on the camera.
• Quick Setup will configure the camera and restart it if necessary.
Upon completion
of Quick Setup for
network and
wireless settings,
[Finished] will be
displayed.
Ethernet cable
LAN jacks Rear panel
of camera Rear panel of
BL-WV10A
To configure a BL-C30A wireless camera
using the Quick Setup utility, set the switch
on the bottom of the camera to [WIRED]
Switch
Bottom of BL-C30A