Panasonic BL-MS103A - Manual (Page 71)

4 Recording Images
[For assistance, please call: 1-800-272-7033] 71
4 Recording Images
There are 3 ways to record images: standard recording, snapshot recording and
timer recording.
Standard Recording:
Pressing the [RECORD] while monitoring a camera will record the images as a
movie (see page 75).
Snapshot Recording:
Pressing the [SNAPSHOT] while monitoring a camera will record a picture (see
page 75).
Timer Recording:
There are 2 types of timer recording (see page 76).
• Timer Trigger: Recording on specified dates only. Recording occurs for the
entire duration of the timer, or only when the sensor is triggered (not
available with HCM series cameras) during set duration.
• Sensor Trigger: Images are recorded only when the specified camera’s
sensor is activated (see page 81). Not available with HCM series
cameras.
Note
• An SD memory card must be inserted in the unit in order to record camera
images.
• Timer recording can specify either timer recording or continuous sensor
recording, but not both. You must choose one or the other.
8:00
Example: When the timer is set to record between 8:30 and 10:30
Sensor trigger
Timer trigger
Sensor
detection
Sensor
detection
Sensor
detection
9:00 10:00
8:00 9:00 10:00
Records for entire duration
When [RECORD TYPE]
is set to [Sensr]:
When [RECORD TYPE]
is set to [All]:
Sensor
detection
Record Record Record
Record Record Record
Sensor
detection
Sensor
detection