Aastra Telecom 9480i Series - Manual (Page 139)

Administrator Level Options
41-001160-03, Rev 00, Releaes 2.4 3-49
Administrator Options
Cert Validation Validate Certificates https validate certificates Enables or disables the HTTPS
validation of certificates on the
phone. When this parameter is set
to 1, the HTTPS client performs
validation on SSL certificates before
accepting them.
Notes:
1. If you are using HTTPS as a
configuration method, and use a
self signed certificate, you must set
this parameter to “0” (disabled)
before upgrading to Release 2.3 or
later of the IP Phones.
2. If you are using HTTPS and the
certificates are not valid or are not
signed by Verisign, Thawte, or
GeoTrust, the phones fail to
download configuration files.
For more information, see Chapter
4,
“HTTPS Server Certificate
Validation” on page 4-44 .
Check Expires Check Certificate
Expiration https validate expires Enables or disables the HTTPS
validation of the expiration of the
certificates. When this parameter is
set to 1, the HTTPS client verifies
whether or not a certificate has
expired prior to accepting the
certificate.
Note: If the “https validate
expires” parameter is set to
enable, the clock on the phone
must be set for the phone to accept
the certificates.
For more information, see Chapter
4,
“HTTPS Server Certificate
Validation” on page 4-44 .
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description
Draft 1