Aastra Telecom 9480i Series - Manual (Page 630)

Operational Features
5-332 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
4 Enter an XML URI in the “Registration Event” field, for when the phone performs registration. For
example:
http://10.30.100.39/PHPtests/
actionuri.php?action=RegEvt&regstate=$$REGISTRATIONSTATE$$&regcode=$$REGI
STRATIONCODE$$
This parameter specifies the URI that the phone executes a GET on, when a registration event
change occurs.
Note: For a registration event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-326 .
5 Enter an XML URI for an incoming call event in the “Incoming Call” field. For example:
http://10.50.10.140/incoming.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an incoming call
event occurs.
Note: For an incoming call event, use the associated variables indicated in the table “Action URIs
and Associated Variables” on page 5-326 .
6 Enter an XML URI for an outgoing call event in the “Outgoing Call” field. For example:
http://10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an outgoing call
event occurs.
Note: For an outgoing call event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-326 .
7 Enter an XML URI for an offhook event in the “Offhook” field. For example:
http://10.50.10.140/offhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an offhook event
occurs.
Note: For an offhook event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-326 .
Aastra Web UI
Draft 1