Aastra Telecom 9480i Series - Manual (Page 999)

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-03, Rev 00, Release 2.4 A-225
Handset Feature Keys (for CT Models ONLY)
Parameter –
feature key selection list Configuration Files aastra.cfg, <mac>.cfg
Description Allows you to specify which key types to display and the order in which to
display them in the “Type” list for the feature keys (CT models only)
when configuring the keys in the Aastra Web UI.
If no value is specified for this “feature key selection list” parameter,
the key “Type” list displays ALL of the key types by default in the Aastra
Web UI.
:
1.
Any key types configured that do not apply to the phone’s
environment are ignored.
2.
An Administrator must use the English value when configuring the
key types in the configuration files.
3.
Any key type already configured on a phone displays in that key’s
“Type” list, in addition to the values specified for this parameter.
4.
After configuring specific key types for a phone, the key types in
the Aastra Web UI display the same for both the User and Administrator
Web interfaces for that phone.
Format Alpha Characters in a comma separated list
Default Value
Range Any of the key types in the “Default Value” field above.
Example feature key selection list: line, dir, callers
• none • park
• line • pickup
• icom • conf
• dir • private
• callers • public
• xfer • flash
Draft 1