Aastra Telecom 9480i Series - Manual (Page 797)

Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4 A-23
Parameter –
http server
HTTP Server
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings->HTTP Server
Aastra Web UI Advanced Settings->Configuration Server
Configuration Files aastra.cfg, <mac>.cfg
Description The HTTP server’s IP address. This will become effective after this
configuration file has been downloaded into the phone.
Optional: You can also assign an HTTP relative path to the HTTP server.
See the next parameter (http path).
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format IP address or fully qualified Domain Name
Default Value 0.0.0.0
Range Not Applicable
Example http server: 192.168.0.132
Parameter –
http path
HTTP Path
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings->HTTP Server
Aastra Web UI Advanced Settings->Configuration Server
Configuration Files aastra.cfg, <mac>.cfg
Description The HTTP path name to enter.
If the IP phone’s configuration and firmware files are located in a
sub-directory beneath the server’s HTTP root directory, the relative path
to that sub-directory should be entered in this field.
Format dir/dir/dir
Default Value Not Applicable
Range Up to 63 alphanumeric characters
Example http path: ipphones/6757i
Draft 1