Draft 1 – Aastra Telecom 9480i Series User Manual
Page 60
IP Phone Models
1-30
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
*See the Aastra 6757i or 6757i CT User Guide for more information about each of these keys.
Softkeys - 12 softkeys on the 6757i IP Phone.
- 6 Top Keys: programmable static softkeys (up to 10 programmable functions)
- 6 Bottom Keys: programmable state-based softkeys (up to 20 programmable
functions)
By default, the top softkeys 1 through 4 are assigned as Services, Directory, Callers
List, and Intercom, respectively. Keys 5 and 6 have no assigned functions. All 6 keys
are programmable and can be assigned to perform specific functions.
The following are the default functions for the top softkeys on the 6757i IP phone:
1 - SERVICES
Accesses enhanced features and services such as XML
applications and voicemail, provided by third parties.
2 - DIRECTORY
Displays up to 200 names and phone numbers (stored in
alphabetical order).
3 - CALLERS LIST Accesses the last 200 calls received.
4 - ICOM
Accesses another extension on the network.
5 - NONE
No assigned function.
6 - NONE
No assigned function.
By default, the bottom softkeys 7 through 12 have no assigned functions. You can
configure all 6 bottom softkeys to perform specific functions on the 6757i IP phone.
However, after you lift the handset, there are specific static softkeys that display that
cannot be changed. These are as follows:
7- DIAL
Allows you to dial out on the phone.
8- CONF
Begins a conference call with the active phone.
9- XFER
Transfers the active call to another number.
Note: For more information about programming the softkeys to perform specific
functions, see
Chapter 5, “Configuring Operational Features”
Programmable Keys/Feature Keys/Expansion Module Keys”
Keys
Key Description
Draft 1