Draft 1 – Aastra Telecom 9480i Series User Manual
Page 240
Network Settings
4-58
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
6
Select Type of Service SIP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP.
7
Enter a value for “Type of Service SIP”. Default is 26.
or
Enter a value for “Type of Service RTP”. Default is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
Valid values are 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
on
For more information, see the section
on
8
Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
9
Select Restart.
IP Phone UI
Step
Action
Draft 1