Draft 1 – Aastra Telecom 9480i Series User Manual
Page 441
Operational Features
41-001160-03, Rev 00, Releaes 2.4
5-143
Configuring Operational Features
You can enable or disable the softkey states using the configuration files or the
Aastra Web UI. In the Aastra Web UI, you disable a state by unchecking the box
for that operational state.
In the configuration files, you use the following parameters to enable and disable
operational states:
•
softkeyN states
You can enter multiple values (idle, connected, incoming, outgoing, busy) for
the "softkeyN state" parameter. For example:
softkeyN states: idle connected
You must associate the softkeyN state parameter with a specific softkey. In the
following example, the softkeyN states parameter is associated with softkey 12:
Last Call Return
idle, connected, incoming, outgoing, busy
Call Forward
idle, connected, incoming, outgoing, busy
BLF/Xfer
idle, connected, incoming, outgoing, busy
Speeddial/Xfer
idle, connected, incoming, outgoing, busy
Directory
idle, connected, incoming, outgoing, busy
Callers List
idle, connected, incoming, outgoing, busy
Intercom
idle, connected, incoming, outgoing, busy
Services
idle, connected, incoming, outgoing, busy
Phone Lock
All states disabled.
Paging
All states disabled.
Empty
idle, connected, incoming, outgoing, busy
Softkey Type
Default States
Draft 1