Aastra Telecom 9480i Series - Manual (Page 410)

Operational Features
5-112 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Using the Configured Paging Key on the IP Phone
The following procedure describes the use of the Paging key. The procedures
assumes you have already configured the Paging key using the configuration files
or the Aastra Web UI.
Notes:
1. Recipient of a Paging call can set a global “Do Not Disturb”
(DND) to ignore any incoming pages.
2.
For incoming Paging, the phones use the Intercom configuration
settings. The incoming Page is dependant on the “Allow Barge-In”
parameter setting and the “Idling/On Call” state.
Aastra IP Phone UI
Step Action
On the IP Phone, press the key you configured for Paging (labeled as “Group 1” in the following
illustration).
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as
follows:
Press the Drop key to end the multicast RTP session and return to the idle screen.
Note: If you enable global DND on the phone, the incoming multicast RTP session is dropped.
Tues Jan1 10:00am
Services
Dir
Callers Icom
Group 1
LAB
ACD
Paging
Drop
00:01
Draft 1