Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 113)

Edit mode
- 113 -
Non-linear edit mode
∫ Telop (simplified title) setting screen
A. You can enter characters for a telop.
• Up to 20 alphanumeric (single-byte) characters can
be entered for a telop.
B. You can select a position where the telop is
displayed.
C. The font effect selected in E is displayed.
D. You can select a font size.
E. You can select a font effect.
Note
` If there are many characters, they may not be displayed
within a screen. To display all of them, select [small] for
the font size, set the display position to the centre, and
select a font effect narrowing the font width. A
B
E
C
D