Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 183)

Output mode
- 183 -
DV device output mode
Outputting to a video device (DV device)
Output the data prepared for output to your video device
to record it on a DV tape.
Before output/recording, you specify the recording start
position and other items on the setting screen.
1. In , select any device to output the data.
• If you have connected only 1 video device, it is
unnecessary to select a device to receive outputs.
2. Confirm the contents to be output and
recorded using
.
The video will be displayed on the Preview screen
(
) .
3. In , select the recording start position on
the tape. ( @ 185 )
4. Determine the settings on if necessary.
• For each item, refer to the descriptions on the input/
output setting screen. ( @ 178 )
5. Click .
The rehearsal will begin.
• To discontinue the rehearsal halfway, click [Stop].
6. When the message for the end of the rehearsal
appears, click [OK].
7. Click .
Output/recording will start.