Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 49)

- 49 -
Input mode
DV device input mode
∫ To search for the beginning of a scene based on
the index
You can search a scene start based on the index.
1.Double-click the scene to search for its start.
The [Properties] screen appears.
• The scene start search does not work properly on a
tape where the time code is not recorded
continuously.
• The start of a non-recorded part cannot be
searched.
2.Click .
Scene start search starts.
When the scene start search is completed, the video
is paused.
• Clicking
pauses the video at the end of the
scene.
Note
` You can also search a scene start by entering the time
code.
Select [Input tape] >> [Jump] from the menu, enter the
time code, and click [OK].
(If you enter a time code exceeding the tape length, an
error message will appear.)