Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 45)

- 45 -
Input mode
DV device input mode
∫ Capture setting screen A Displays the name of the input device (Video Input
Source).
B If you capture video using the tape information, the
tape information name will be displayed. ( @ 58 )
C You can select the save destination for the video
captured.
• You can select one from the folders registered in
the library.
D Displays the information of the video to be captured.
• If frame drop occurs, the number of locations where
a frame has dropped is displayed.
(Frame drop: A frame in the video could not be
captured during video capturing.)
E You can set the name of the video clip or the range
to be captured.
Select the clip to be set from D, enter the clip name
or the time codes representing the start and end
points for capturing.
• The clip name, if not set, will be automatically given.
F Whether or not capturing is ready now, etc. are
displayed.
If the free space on the hard disk is insufficient, how
long the video can be captured will be displayed.
G The available time for capturing in the free space on
the hard disk is displayed.
A B C
D
E
F
G