Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 58)

- 58 -
Input mode
DV device input mode
Saving tape information
If you save the index information, etc. as tape information,
you can use the information whenever you use the same
tape.
1. Select [File] >> [Tape information] >> [Save
tape information as...].
The save destination setting screen is displayed.
2. Enter the file name and click [Save].
The tape information is saved and displayed in [Tape
library] in the library.
• For the saving destination, select a folder registered
in the library.
Note
` The extension for a tape information file is [.tap].
` When playing the tape information, connect the video
device beforehand.
If it is not connected, exit the MotionDV STUDIO,
connect it, and activate the MotionDV STUDIO again.