Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 241)

Q&A
- 241 -
Special effects cannot be used normally
When a transition effect is set, the length of the
video changes.
• If a transition effect is set, the clips before and after
the transition are shortened. This is because the
transition effect is created by blending parts of those
clips. (When the setting is cancelled, the original
length is restored.)
• To restore the original lengths of the preceding and
succeeding clips, double-click them and input their
lengths on [Properties] screen. (It is impossible to
make the video clip longer than on import. Even if
you input a time longer than on import, it is corrected
to the length on import.)
It is impossible to set the video effects, and delete
transition effects.
• The maximum number of clips to be arranged on the
edit track is 1024 and the maximum duration is 6
hours 45 minutes. In cases where such a maximum
value is exceeded if the effects are set or removed,
the message is shown and the original state is
restored.
Delete clips to ensure margins of quantity and time,
and then perform the setting or deletion again.
Special effects (e.g. title) are not inserted in order
of setting.
• In case where multiple special effects are set in a
clip, the priority of display is as follows. (Title, Telop
is assigned the lowest priority.)
If you wish to insert special effects in order different
from the order of priority, first set only an effect you
wish to insert, and apply manual rendering.
(Right-click the mark of each effect, and select
[Render...]. Then you can execute manual
rendering.)
Video effect
Title , Telop
Transition effect
Video clip and still image clip
Last