Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 64)

- 64 -
Input mode
DV device input mode
Registering a folder
The [MaterialFolder] is pre-registered in the library screen.
(When the MotionDV STUDIO is installed, a folder named
[MotionDV STUDIO] is created on the personal computer
and registered with the indication name [MaterialFolder].)
Video, audio, editing information, etc. will be saved in it as
default, but you can register another folder to save the
data in.
1. Click .
The new folder creation screen is displayed.
• You can also display the new folder creation screen
from [Library] >> [New folder] in the menu.
2. Determine the folder to be registered and its
name.
A You can select a folder to be registered.
Click to select a folder to be registered and click
[OK].
The folder’s path (C:\, etc.) is displayed.
• The folder’s path (location) can also be directly
entered.
When you create a new folder, make sure to enter
the folder name to the end of the path name of the
folder. (Up to 100 alphanumeric <single-byte>
characters can be entered for folder name including
the path.)
B You can enter the display name for the folder in the
library.
• Up to 128 alphanumeric (single-byte) characters
can be entered for display name.
3. Click [OK].
The folder is registered.
Click
, and the registered folder will be displayed.
Note
` This function cannot be used if the hard disk containing
the folder in which the data is to be recorded has less
than about 300 MB of free space.
A
B