Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 68)

- 68 -
Input mode
Import sound data mode
Capturing audio materials
1. Connect the device you are capturing audio
from to the PC.
• When capturing audio from the microphone, connect
the audio device or microphone to the microphone
terminal of the PC. (Some settings may be necessary
on Windows. Please refer to the relevant PC manual,
etc.)
• When capturing audio from an audio CD, insert the
audio CD into the CD-R drive, etc. on the PC. (On
some PCs, capturing from CD may be disabled. For
details, please refer to the relevant PC manual.)
2. Click .
Audio material capturing starts.
3. Play the audio.
• When recording a narration, etc., speak into the
microphone.
4. Click when you end capturing.
Capturing ends.
5. Click to check the audio captured.
• If you want to retry the audio capture, click [Delete]
and capture the audio again.
6. Determine the save destination and the file
name in
.
• For the save destination, you can select it from the
folders (the default is [MaterialFolder]) registered in
the library.
7. Click [Save].
The audio material is saved in WAV (uncompressed)
format and the save completion message appears.
• The WAV (uncompressed) files are displayed in
[Audio] in the library.
8. Click [OK].