Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 184)

Output mode
- 184 -
DV device output mode
• To discontinue the output/recording halfway, click
[Stop].
• When you wish to change the data to be output/
recorded prior to output, return to the Edit mode and
change the data on the edit track.
Or, re-select any clip on the library, and drag and
drop it on the control screen.
8. When the message for the end of the
recording appears, click [OK].
Output/recording will be completed.
Note
` If the rehearsal is not required, skip it.
` If it becomes impossible to record data correctly during
output/recording (for example, the video is distorted),
reboot the personal computer.
` If the personal computer used is connected with a
networking device such as a router, wireless LAN or a
USB device, correct recording sometimes cannot be
made.
In this case, disconnect such devices from the personal
computer.